There are many situations that require video capture, but where sending in a camera operator is not feasible. When you need a small and unobtrusive camera that you can “set and forget,” the Grass Valley pan-tilt-zoom camera provides a versatile and affordable way to capture images in situations that are not suited to larger cameras, with the image quality you expect from a Grass Valley camera.
Operating the camera is simple. The PTZ 35X HD reduces production complexity with remote control from any of Grass Valley’s Kula switchers or automated as a part of GV Pace pre-set scenes. Images from the PTZ 35X can be intermixed with images from Grass Valley’s LDX cameras without the audience seeing noticeable shifts in image quality.
Key Features
- Adopts the most advanced Image Signal Processing, with a 1/1.7-in. 12.4 MP sensor, providing 3840x2160p30 Ultra HD video resolution
- 4K wide angle optical lens: 35x optical zoom and 2x digital zoom, with a wide 60.5° horizontal angle of view
- 4K video over IP, H.264, H.265 encoding
- Supports NDI v4.0 video transmission and control
- NDI|HX, HDMI, 3G-SDI, USB outputs, fit for different application, 4K video streaming over NDI|HX and HDMI
- White balance, exposure, focus, iris can be adjusted auto-matically or manually
- Supports PoE: one single CAT5/6 to get video, control and power supply
- Special focusing algorithm: fast and precise focusing performance when zooming or moving
- Smooth PTZ mechanical design, accurate pan tilt motor control
- 128 presets supported — exposure parameter and white balance parameter can be saved in presets (in manual mode)
- Standard Sony VISCA, IP VISCA, PELCO-P, PELCO-D control protocol; IP VISCA over both TCP and UDP
- Daisy chain supported, max. 7 cameras connected in VISCA protocol
- Image flip function, supports upside-down installation
- Fast video format switch: less than 3 seconds
- Supported field upgrade for ISP, ARM, FPGA and USB
- USB 3.0 port compatible with USB 2.0 output
- Supports RS-232/RS-485/UVC control
Video Formats
| HDMI (v1.4) |
3840x2160p30/25 1920x1080p60/50/30/25/59.94/29.97/24 1920x1080i60/50/59.94 1280x720p60/50/30/25/59.94/29.97 | |
| SDI | 1920x1080p60/50/30/25/59.94/29.97/24 1920x1080i60/50/59.94 1280x720p60/50/30/25/59.94/29.97 | |
| USB |
1920x1080p60/50/30/25 (USB 3.0) 1280x720p60/50/30 (USB 3.0) 1280x720p25 (USB 3.0 & USB 2.0) 1024x576p30 (USB 3.0 & USB 2.0) 960x540p30 (USB 2.0) 640x360p30 (USB 2.0) 512x288p30 (USB 2.0) | |
| IP |
3840x2160 @1~30 / 1920x1080 @1~30 (main stream) 1280x720 @1~30 / 1027x576 @1~30 / 640x360 @1~30 (sub stream) | |
| NDI | 3840x2160 @15~30 1920x1080 @15~30 1280x720 @15~30 1027x576 @15~30 640x360 @30 (low bandwidth mode) | |
Specifications
| Video Interface | HDMI (v1.4), SDI, NDI|HX, USB3.0, USB2.0 | |
| Sensor | 1/1.7-in. 12.4 MP CMOS sensor | |
| Zoom | f5.8 – 20.3 mm (35X), f1.5 – 4.8, View angle: 60.5° (far) – 2.02° (near), horizontal | |
| Rotation Angle | Pan: -170° ~ +170°, Tilt: -30° ~ +90° | |
| Rotation Speed | Pan: 0°~120°/s, Tilt: 0°~80°/s | |
| Preset | Remote controller: 10, RS-232: 128, Accuracy: 0.1° | |
| Control Port | RS-232, RS-485, NDI|HX (VISCA over IP), USB 3.0 (UVC1.5), USB 2.0 (UVC1.1) | |
| Network Speed | 1000 Mb/s | |
| Video Encode | H.264/H.265 | |
| Bit Rate Control | Variable bit rate, constant bit rate | |
| Video Bit Rate | 1024 kb/s ~ 20480 kb/s | |
| Supported Protocol | TCP/IP, HTTP, RTSP, DHCP, RTMP, ONVIF (v2.4), NDI (v4.0) VISCA over IP (TCP & UDP), HTML5, VISCA, PELCO P/D | |
| PoE | Supported, PoE+(IEEE 802.3at), ESupported, PoE+(IEEE 802.3at) | |
| Daisy Chain | Support RS-232 serial daisy chain | |
| Minimum Lux | 0.1 lux | |
| White Balance | Auto/indoor/outdoor/manual/push/sodium lamp auto/sodium lamp | |
| Exposure | Auto/manual/bright/shutter/iris | |
| Focus | Auto/manual | |
| Iris | Auto/manual | |
| Electric Shutter | Auto/manual | |
| Gamma | Supported | |
| WDR | Supported | |
| BLC | Supported | |
| 2D Noise Reduction | Supported | |
| 3D Noise Reduction | Supported | |
| Anti-Flicker | OFF/50 Hz/60 Hz | |
| Pan Tilt Flip | Supported | |
| Input Voltage | DC12V/PoE+ (IEEE802.3at) | |